UTL MSCC 2420 MPPT Solar Charge Controller Price

5,599.00 3,200.00

Out of stock


UTL MSCC 2420 MPPT Solar Charge Controller Price

Solar charge controller is an advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over-discharge of the battery.

There are a number of protections that the Solar Charge Controller ensures. Solar Charge Controller stops reverse current flow from battery to solar array, it provides load short circuit protection, it provides Battery/Panel reverse protection through DC fuse and Overload protection also.Solar charge controller is an advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems.

Adding Solar PV is the logical way to extend the back up hours and reduce electricity bills- but must be done the right way. Add too little PV Watts-the Solar addition does not really serve the purpose of long back up. Size up your day time loads and add at least enough Solar PV to take care of day time loads. However, here is the nub, if you add enough Solar PV to take care of day time loads, the power available from the PV panels can exceed the safe charge rate to the batteries.


Model UTL MSCC 2420
Technology MPPT/PWM
Precise Control Micro Controller Based
Switching Device Power MOSFET
Efficiency >95%

Solar Panel

Recommended Panel 36-Cells
Max Panel Support 500 W
Panel Max VOC 45 V
Operating Range 31V – 44 V
Low Cut 22.5V±0.2V
Low Cut Recovery 30V±0.2V


Nominal Voltage 24 V
Charging Current 20A
Bulk/Boost Voltage 29 V±0.2V
Float/Trickel 27 V±0.2V
Equalize Voltage 30 V±0.2V
Equalize Period 28Days


Over Charging Current Yes
Over Charging Voltage Yes
SPV Reverse Polarity Yes
Battery Reverse Polarity Yes
Output Short Circuit Yes
Overload Yes
Reverse Current Flow at Night Yes
Lightning/Surge Protection Yes

LED Parameters

SPV ON Green
Charger ON Green
Battery Full Green
Battery Low Red


Cabinet Type Plastic
Cabinet Dimension, L x W x H (mm) 180x220x85
Weight 2 Kg
Cabinet Color Gray
Placement Horizontal / Indoor


Operation Temperature 0°C to 50°C
Storage Temperature -10°C to 70°C
Max. Relative Humidity (Non Conditioning) 5% to 95%
Ingress Protection IP-20

When the energy from the Solar panels are servicing the loads or when both the sources of energy (Solar and Grid through the Inverter) are charging the batteries, the charge current to the batteries can be higher than what is safe for the batteries. With its unique NET CURRENT to battery monitoring and control  MPPT ensures that the charge rate to the batteries is maintained at all times within its safe limits, preventing premature failure of the batteries.


  • Save Money with UTL rMPPT Technology.
  • Protection from Battery Over Voltage and Current.
  • Protection from load short circuit to keep your system safe in lower rating.
  • Multiple charging stages to maintain battery gravity.
  • Remove build-up sulphate to increase battery life.
  • Run DC Load with UTL Solar Charge Controller in lower rating only.
  • Protection from reverse flow of current from battery to panel.
  • Lightening and surge protections.

Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm  Before Purchasing.

Additional information



Input Voltage range (Voc)

31 V – 45 V

Max Panel Capacity

500 W

Solar Charger


Solar Charger Current

20 A

Nominal Battery Voltage

24 V

Switching Element



There are no reviews yet.

Be the first to review “UTL MSCC 2420 MPPT Solar Charge Controller Price”

Your email address will not be published. Required fields are marked *