UTL Heliac 1050 Solar Inverter Price In India
Solar Home PCU (Heliac) is a solar hybrid inverter which utilizes both the Solar Power and Grid Power to charge the batteries with giving priority to solar power. Solar power is of the first priority while charging. This means that when Solar power is available, the batteries will be charged with it only, irrespective of whether Grid power is available or not. It is designed to give you the maximum advantages from the Sun and thereby reduces your Electricity costs.
Home PCU gives first priority to Solar power over Grid power during charging. It means that when Solar power is available, the batteries will be charged through Solar Power whether Grid Power is available or not. It goes to Grid power only when Solar Power is unavailable. Thus it helps in reducing electricity costs along with keeping the environment clean.
|Operating DC Voltage
|Type of Charger
|Input Voltage Range (Min – Max)Voc
|Maximum PV Power Recommended
|Nominal Grid Voltage
|Battery Low Buzzer
|Battery Low Cut
|Battery High Cut
|Solar Panel Charging Voltage (Boost)
||13.7 V (SMF) , 15 V (TUB)
|Solar Panel Charging Voltage (Float)
||13.7 V (SMF) , 14.2 V (TUB)
|Solar Panel Current
|Grid Charging Voltage (Boost)
||13.5 V (SMF) , 14.5 V (TUB)
|Grid Charging Voltage (Float)
||13.5 V (SMF) , 13.8 V (TUB)
|Grid Charging Voltage (Equalize)
|Grid Charging Current
||15 A / 18 A
|Grid Reconnect @ Battery Voltage
|Grid Low Cut Voltage
||170V±10V (ENABLE) , 100V±10V (DISABLE)
|Grid Low Cut Recovery
||180V±10V (ENABLE) , 110V±10V (DISABLE)
|Grid High Cut Voltage
||265V±10V (ENABLE) , 290V±10V (DISABLE)
|Grid High Cut Recovery
||255V±10V (ENABLE) , 280V±10V (DISABLE)
|Changeover (Battery to Mains)
|Changeover (Mains to Battery)
||<10ms (ENABLE) , <80ms (DISABLE)
|Nominal Output Voltage
|Load Power Factor
||<3% (Linear Load)
|Over Load Capacity
||>110% 3Time Auto Reset, 4th Time Shut Down , >150% Output Goes Down
||Overload, Battery Low, Battery High, Output Short Ckt., Battery Reverse, Phase Reverse, Over Heat, Over frequency, Under Frequency, SPV High.
||System ON, (IT Mode, SMF/TUB, Boost Chg., DG Mode, Grid Chg.) Enable/Disable
||Reset for System ON/OFF, UP, Down, Back, Enter(For LCD Calibration)
||Battery Voltage, Charging Current, Grid Voltage, Grid Frequency, Output Voltage, Output Frequency, Load%, Battery Graph, Overheat, SPV Current, Working Mode(HYB/PCU/SMT).
|Max. Relative Humidity @25°C (non Condensing)
|Noise @ 1meter
- Inbuilt PWM Solar Charge Controller.
- Multi-Colour LCD Display.
- Freq.-Available 50 & 60Hz.
- Charging Multi Stage (Bulk, Absorption & Float) Auto Equalize in a month.
- Solar Priority of Load & Battery Charging.
- Preference to Solar Power over Grid Power.
- Pure Sine Wave Output.
- Protections : RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV.
- Compatible with DG as an Input Source.
- Compatible with IT Load.
- Compatible with SMF, Gel & Tubular Batteries.
- Priority Selection – PCU, Smart & Hybrid for Saving Energy and Money.
Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm Before Purchasing.